Laars boilers
Products

Case Study: System Upgrade with Laars Boilers

January 09, 2019

A 20-story building with 330,000 Square feet of space recently got an HVAC upgrade. The owners of this tower at 1750 Elm Street in Manchester New Hampshire recognized the need for increased efficiency.

Laars boilers
Laars boilers

The six 1,400 MBH cast-iron oil-fired boilers needed to be replaced. With 36” doorways for access, the Laars boilers were a good fit. The 3,000 MBH gas fired boilers heat the entire building utilizing perimeter and fan coil units. There are also package units in the building that are fed with steam bringing in 100% outside air. The Laars MagnaTherm 3,000,000 Btu boilers run on their own reset curves and are supplied an on/off signal from the BMS system.

Denron Plumbing and Heating was the contractor. Joel Pickering Project Manager oversaw the project .

Tower Hill Sales Associates represents Laars Boilers. They have been serving the HVAC industry in New England since 1992. They continue to focus on the commercial markets with customers. With a strong line card, representing manufacturers at the forefront of technology and sales innovations, they feel that the years to come will present their clients with the ability to save energy, water and money – value for the dollars they spend. Whether the project be housing, hospitals, labs, arenas or schools, they can provide design assistance for customers that will help the end user get the most efficient use of energy and floor space. They warehouse many of their products for quick delivery or pick up. Visit www.towerhillsales.com.

About Laars Heating Systems Companies

Laars Heating Systems is one of the nation’s leading boiler and water heater manufacturers for both residential and commercial heating.

From high-efficiency, combination systems for residential heating and hot water to systems that supply entire stadiums, the Laars family of more than two dozen heating products and supporting accessories and controls meets the needs of today’s demanding heating system applications.

Laars products are widely used in space heating, radiant floor heating, volume water heating and industrial process markets covering a range of 50,000 to 5,000,000 BTU’s, utilizing either natural gas or liquid propane fuels. LAARS meets the needs of today’s more demanding heating systems applications with over 20 different heating products and supporting accessories and controls. Visit www.laars.com.