20V MAX* Cordless Fencing Stapler.
Tools

DEWALT Announces 20V MAX* Cordless Fencing Stapler

August 02, 2019

DEWALT introduces the 20V MAX* Cordless Fencing Stapler (DCFS950) that is optimized for installing various types of agricultural fencing such as woven wire, high tensile, barbed wire, deer fencing, field fencing, and more. Part of the 20V MAX* System from DEWALT featuring over 200 products, the stapler offers cordless convenience and is part of a large system of compatible batteries and chargers.

20V MAX* Cordless Fencing Stapler.
20V MAX* Cordless Fencing Stapler.

The advantage provided by the 20V MAX* Cordless Fencing Stapler is that it can staple up to 590 staples per charge or 1,400 feet of fencing per charge**. It’s also up to three times faster than manual hammer-driven stapling***. The stapler also incorporates many features found on professional-grade fastening products, including tool-free stall release, tool-free depth of drive, tool-free mode select, tool-free jam release, tool-free speed select and a brushless motor. In addition, the tool features a multi-angle contact trip for accurate staple placement, low staple lockout, and a 35-staple capacity for fast and easy reloads.

Weighing 8.8 pounds without a battery, the 20V MAX* Cordless Fencing Stapler features LED work lights and an ergonomic handle that has a low center of gravity, providing balance and control. It accepts 9Ga DEWALT Fencing Staples at .157 inches in diameter in 1-1/2”, 1-3/4”, and 2” staple lengths (staples sold separately). Available in summer 2019, the 20V MAX* Cordless Fencing Stapler will come kitted with two 5.0Ah Batteries for $799 MSRP (DCFS950P2) or bare for $599 MSRP (DCFS950B). The 20V MAX* Cordless Fencing Stapler will come with a three-year limited warranty, one-year free service contract and 90-day money-back guarantee.

*Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18.

**Based on 5 staples per post, 12 feet between post, using DFS9150B1G staples on Speed 1 in rapid sequential mode and DCB205 battery.

***Using DCB205 battery, stapling five 2” staples into 6” diameter fence post.